Milescraft 1300 Orbiter 360 Degree Drill Attachment

List Price: $34.52 Discount Price: $26.50

Features:

• Split body construction and beveled gears allows a drill bit to be positioned at virtually any angle from the drill granting access to hard to reach places
• 3/8" Keyless chuck included for fast easy bit changes
• Soft grip handle is comfortable to use and provides secure lock/unlock for body
• 3/8-inch Hex shaft fits any 3/8-inch or larger drill
• Fits any 3/8-inch or larger drill; keyless chuck for fast, easy bit changes

Customer Reviews:

Not for prime time [Posted on 2005-12-08]
I too bought this tool to drill a few studs for electric wires in a remodel project. I got 9 studs drilled when it would only make noise and not turn. I was using a 3/4 inch spade bit and a 14.4v cordless drill.

Seems OK to me. [Posted on 2006-07-28]
This tool takes about five minutes to learn to loosen, adjust, and tighten. It's fairly heavy and I've used it maybe a dozen times with no issues. It's a great idea and very handy even on the drill press at times.

a bit bulky but it works great [Posted on 2006-12-17]
I wish it was smaller but it would also remove its durability and flexibility as well. This is a great product. If you want to treat it as a full angle drill I would suggest getting one as this is not a substitute. However, treated as a jig for a drill it can solve a lot of problems at a decent price. It works as promised and it ingenious in design. I'm not a great fan of keyless chucks as I find their slippage a pain in the behind but this works better than most I've used and so far no slippage.

Good idea, but... [Posted on 2007-01-24]
I got one of these things for Christmas, and it seems like a great idea. However, I found that the chuck wobbled; that is, it didn't revolve around its axis. Which means, if you drill a hole with a 1/8" drill bit, the hole will be larger than 1/8". Typically, when you have a bit in your drill, if you sight down the length of the bit while it's spinning, you can see that it remains in a straight line. With this first orbiter the bit was very much NOT in a straight line; I tried 2 bits in it, with the same result. Not to mention the fact that the orbiter just FEELS like it's wobbling. So I'll call my first Orbiter "#1".
I took it back to the store and exchanged it for another one (#2). This one was better than #1, but still not right; you could easily see that the chuck was wobbling as it rotated. It would be usable for some things, but still not the way it should be.
So I emailed the company, and got a nice email back from a man who said he would send me a new one, and he would check it before he sent it to me. That's the good news. The bad news is, the one that he checked to be sure it was straight, #3, is not as good as #2!
So... the Orbiter sounds like a great idea, but as long as it can't spin a drill bit (or a screwdriver bit) straight, it's definitely limited in its usefulness. (Just imagine trying to drive a screw with it wobbling around!)

Great Tool, Easy to Use [Posted on 2008-01-04]
You can use this drill attachment at any angle between 90 and 180. The handle, which you use to loosen or lock the attachment into the desired angle, is a big help during the drilling process. Depending on how you wish to apply pressure to the drill chuck, either by pulling or pushing on the handle, you can loosen the handle and change angles until it's "just right" and comfortable. At the price + shipping, it's very very reasonable for the quality of the product. It works much better than the $18 fixed-at-90 degrees drill attachment, sans handle, I picked up a couple of years ago. Oh, and because you can lock it at 180 degrees, you can drill straight while using the handle for better "handling" and ease of use. I may pick up another to give as a gift to my best friend.

Click here for more details and discount information...