Home >> Saws >> Miter Saws
Home >> Saws
Home >> Construction Tools
Milwaukee 6490-6 Magnum 15 Amp 10-Inch Miter Saw | List Price: $383.00
Discount Price: $320.05
 |
|
Brand: Milwaukee
Binding: Tools & Hardware
Features: - 10-inch miter saw (no bevel) with a powerful 15 amp motor that produces up to 4800 rpm
- Miter table moves smoothly from one angle to another as the table rotates on roller bearings
- Extra tall fence supports large work pieces; automatic retracting lower guard provides high visibility and large capacity
- Positive stops at 0, 15, 22.5, 30 and 45 degrees; cuts 4 by 4 and 2 by 6 inches at 90 degrees; includes saw, blade, and wrench
- Tool weighs 31.5 pounds and is 19-1/2 inches long; 5-year manufacturer's warranty
The best [Posted on 2001-03-11]
I bought this model back when they cost $300, so under $200 is a good deal. This is the best basic miter box you can buy. I've installed base, casing, and crown 40 hours a week for 4 years with this and I have no complaints. Unless it's getting limited use, don't buy a $150 miter box. Get this one. The gauge is accurate and the 60 degree cut has come in handy. When you graduate to precision cutting wider stock (> 5-1/2" wide), get a sliding compound miter saw, but keep this in your arsenal for the base and casing.
Very Precise mitre saw [Posted on 2001-08-18]
I use it to cut aluminum extrusions, it feels solid and makes very accurate cuts. I used to have a lower price mitre saw and this one worth the extra bucks. I think this is the best mitre saw on its class the next step would be a commercial type saw (CTD, Pistorius...)
Good and Simple!!! [Posted on 2003-06-18]
If you're looking for a saw that will last a lifetime this is the one to get! Built to Milwaukee's tough "Heavy Duty" standards this saw has quality written all over it! It may lack the compound adjustments with all the bells and whistles and cost a bit more than a cheap Taiwan model, but outfit this saw with the proper blade or jig and it'll tackle anything from trim work to rough framing! Not to mention, with excellent power and precision. The fifteen amp motor is as powerful as it gets without tripping most circuit breakers. This rock solid machine is vibration free and most of the dust actually goes out the dust port! The high fence and clever wrench storage clip completes this simple design. What I really like about this saw is the effective blade retraction system. The clear lower guard retracts into the upper blade guard assembly away from snagging your thumb or sleeves as the guard moves upwards. O.K., maybe it's just the way I'm holding the handle with my big hands but I have gotten the pointy joint on my thumb slammed on the retracting path of the DeWalt and Makita guards...Ouch!!! To me, there is insuffient space between the handle and retracting guard on those saws. Along with the high sticker price, this saw should have came with a set of extentions with stopping block and hold down clamps. These accessories are quite pricey when purchased separately. I guess to enjoy fine dining you must order ala carte just as you would with this fine tuned machine!
Best on the market [Posted on 2005-07-26]
As a professional, and having many other saws in my shop, I can tell you that you can only be impressed by the accuracy and stability of this saw. My workers all enjoy and comment strongly about how much they like it. Thanks!!!
Dead on arrival.... [Posted on 2005-07-30]
I just received a Magnum Mitre Saw model 6490 and I am extremely disappointed. I can't believe they make these in Taiwan now. First, it would not even run!!! Milwaukee's Taiwan buddies don't seem to understand that spade connectors are supposed to be TIGHT, not LOOSE!!! The spade connectors for the brushes were loose, and one was NOT EVEN CONNECTED!!! This is a SAFETY Hazard!! I fixed it, since I DO have a brain and understand basic electrical connections. Second, I go to cut the kerf in the plastic insert, and guess what? IT ISN'T STRAIGHT!!! The kerf is not parallel to the sides of the plastic insert, and to top it off, it was not perpendicular to the fence!! What is wrong with these people?! I loved their little 3/8" hammer drill, but this is a piece of crap. I don't even know how to adjust the blade so that it cuts a proper kerf nice and parallel with the insert, and no, the fence was nice and tight, it had not "loosened" in transit. The box it arrived in was undamaged too, so I can only assume that these people don't know square and safe from cocked and dangerous. Worthless.
Click here for more details and discount information...
|
){kind=link}