Home >> Construction Tools >> Accessories
Rousseau 3509 9-Inch x 12-Inch x 3/8-Inch Deluxe Router Base Plate | List Price: $49.00
Discount Price: $34.95
 |
|
Brand: Rousseau
Binding: Tools & Hardware
Features: - 1/4-by-1/2-inch lip
- Rings snap out to accommodate larger router bits
- Snuggers remove excess play
- Shoulder pin can be used to start freehand work
- Limited lifetime warranty
tablesaw router table [Posted on 2007-02-17]
I used the plate to add a router table to my table saw (ridgid 3650). The plate was very easy to install (w/o the template kit). It does require clamping a couple of shop made "L"s to the router table for the plate placement, which would be somewhat time consuming. I just clamped boards to the table and routed away with no problem. I would recommend the template for easier installation. The plate does not sag at all with my router installed, the installation kit ensures the plates does not move at all. Very good purchase.
Good inexpensive router plate [Posted on 2007-04-10]
This plate kit is well made and relatively easy to mount in my new router table top. The company included a good leveling system and reasonable directions. They should have included the template for cutting the hole. I used two carpenters squares to make a guide--it worked quite well.
Good Product [Posted on 2007-05-07]
Works well with the router table that I had built. Instruction are very detailed.
Rousseau Deluxe Router Plate [Posted on 2007-12-29]
I saved a lot of money using this router plate to make my router table. The instructions are easy to follow and the end result was perfect.
DO NOT WASTE YOUR MONEY!!!!! [Posted on 2008-07-22]
I bought this product to do raised panels. You have spend an extra 20 bucks to buy a template so that you can install this piece of junk. My router has above the table height adjustment, while drilling the whole, the plate chipped out, I had to glue it back together. Also, when trying to install the levelers, the plate chipped out again!!! I did not install the levelers at all do the plate chipping. I have a 60 dollar piece of junk that is crowned in the center!!! DO NOT BUY THIS, U WILL HATE IT!!!
Click here for more details and discount information...
|
){kind=link}