Skil HD77M-22 Mag 77 7-1/4-Inch Worm Drive Circular Saw with Bag

List Price: $354.00 Discount Price: $189.99

Features:

• 13 amp motor, 4,400 rpm
• Lightweight magnesium housing
• Push-button blade lock
• Diamond arbor
• Two-year warranty

Accessories:
DeWalt DW3578 Series 20 7-1/4-Inch 24 Tooth ATB Thin Kerf Framing Saw Blade with 5/8-Inch and Diamond Knockout Arbor	DEWALT D5100SM Heavy Duty Ballistic Nylon Tool Belt, Waist 28-Inch to 38-Inch	Skil 75342 10-Inch Saw Blade Combo Pack with 60 Tooth Crosscutting Blade and 28 Tooth Ripping Blade	DEWALT DW3578S8 Heavy Duty 10-Pack of 7-1/4-Inch 24 Tooth Framing Blades with FREE DEWALT Soccer Ball	DEWALT DW3578F8 Heavy Duty 10-Pack of 7-1/4-Inch 24 Tooth Framing Blades with FREE DEWALT Football

Customer Reviews:

Don't waste your money on some other saw [Posted on 2002-07-10]
I own several other circ saws, including a Makita hypoid (Their name for worm drive) They don't even come close. If you can't spend the $190.00 for one of these saws buy a $50.00 black and decker and use a good Marathon blade in it, because everything else in my opinion is in the same class and you would be wasting the extra money. If it was possible to rate this saw with 10 stars I would. The black bag gets dirty easily and the saw doesn't fit with the blade installed, but who cares about that stuff!!!

It will make you a better carpenter [Posted on 2003-09-03]
This saw made me a better carpenter. Combined with a Freud Diablo II blade, this saw handles 2 x dimension lumber so easily that you can make incredibly smooth and straight cuts. When cutting a 45 degrees through a 2 x 10, I cut a straighter line cutting freehand with this saw then with a "homeowner" quality level saw and a straight edge. The reason is the even power. You can get into a very smooth rhythm of feed rate based on the saw's power. It's worth every penny.

Top Notch Saw [Posted on 2005-08-21]
I use this saw on a daily basis and there is no other saw I would consider. I have tried both the DeWalt and Bosch versions of this saw and do not care for either. Although each of the saws cut well, the construction doesn't seem to be as sturdy as the Mag.

The Mag 77 is the smoothest and comfortable saw among the three. If this is your first saw beware the torque on start up, it will turn the saw in your hand a little, once you're used to it its not a big deal though. The weight of the saw will also help keep your cuts straight.

Any saw will bind up under too much pressure from any material. If this happens to the Mag, the motor will continue to spin and the blade will stop moving, this is a built-in saftey feature to prevent burning up the motor by seizing it with too much torque.

Skil made a few recent improvements to the table, or plate as many call it. Previously, it was just a flat piece of aluminum, but recently Skil rounded the edges which provides much more ridgidity and will prevent it from warping. I can attest to this as I dropped my newest saw 12 feet off a ladder and the plate is in perfect condition (except for a modest scratch)! I also highly recommend a rafter hook to prevent such occurances.

One other improvement on the latest Mag 77 is a fatter flange on the blade guard. This prevents binding on thinner material, especially when cutting at angles. Some professionals will pin or remove their guards due to this problem, I strongly recommend that the guard be left intact. Saftey is much more important than convenience. I would rather keep all of my limbs and deal with an annoying guard than the other way around. Accidents happen way too often without inviting them.

Overall I believe there is no better saw on the market. Whether you are a weekend warrior or a proffessional builder this is the saw to own and most in the industry agree, just look at the number of these saws on any jobsite.

Make sure you buy the package with the bag as it is the saw with the upgrades I mentioned (HD77M-22).

If you want the best for a lifetime get a Mag 77.

Choice # 1 [Posted on 2006-07-29]
I just purchased the Mag 77M and have used it only a few times, but it is the best saw I ever owned. My son in law has built a house and done many remodels with his and recomended it when my Black and Decker failed.The new Mag base is lighter than previous Skill's and at 71 years old I prefer the lighter weight. I also have the 5 1/2 inch Skill and love it for small stuff.

So Good, I Bought A Second One! [Posted on 2006-08-31]
I already own a Skil HD77, and love it very much. I was always intrigued by the lighter Mag 77, and the 2#'s weight savings. I was recently thinking of getting the little Porter Cable wormdrive trim saw that Norm Abrams uses on The New Yankee Workshop, but at a cost of about $220, it was too steep, for a small trim saw. So I went ahead and got a second Skilsaw, this time I got the HD77M-22 for about $183, minus $25 for spending $199, for a net cost of $158 (about $60 less than the Porter Cable trim saw). I find it a little hard to believe, that the Skil HD77M-22, is so much cheaper than the PC trim saw, and it's a much more versital saw. Mine will be used mostly for breaking down hardwood plywood, to be squared up on my tablesaw, for cabinets, bookcases and such. I suspect that it could be called into duty to help build a shed, or a deck for family members. Having a second saw may be a little extravigant, but I had some B-Day and recycling money to spend, so why not? It will relieve me from having to change saw blades, from 24T to 40T for the plywood. The Skil wormdrive saws, are the best circular saws made, period. If your are remotely thinking of getting one, don't hesitate. They are the saw choice of professionals. Keep the oil changed, use sharp blades, and it could end up being one of the best investments of your lifetime.

Click here for more details and discount information...